Block Size Bitcoin.com Charts

BitcoinABC

https://bitcoinabc.org
[link]

Theymos (2010): "In the future most people will run Bitcoin in a "simple" mode that doesn't require downloading full blocks or transactions. At that point MAX_BLOCK_SIZE can be increased a lot."

Theymos (2010): submitted by Yurorangefr to btc [link] [comments]

Theymos (2010): "In the future most people will run Bitcoin in a "simple" mode that doesn't require downloading full blocks or transactions. At that point MAX_BLOCK_SIZE can be increased a lot."

Theymos (2010): submitted by BitcoinAllBot to BitcoinAll [link] [comments]

While doing my-own-node project, I understood why blocksize should never be increased.

Took me 2 weeks to download the chain, then something went wrong and I had to do it all over again. It literally took me a month to fully download the chain. Now I'm waiting for it to sync (currently at 2%) I think it's safe to say that this is at least a couple more weeks.
I can't imagine how things would have been if Blocksize was 32mb? This would literally abolish alot of people who want to run their own nodes. Throwing quick fixes at a problem was not never a solution.
anyways, joining the party soon.
submitted by Leader92 to Bitcoin [link] [comments]

Finally running a Bitcoin node!

Today, I have finally downloaded the full block chain and am running a full bitcoin node (took ~3days).
I have a blockchain explorer, but I still need to work on installing and running lightning network, and exploring other tools. It's a good feeling. I will write up what I bought, what I returned, and how I got on.
Just wanted to tell someone... pretty excited to be a part of the Bitcoin Full Node community.
[email protected]:~ $ bitcoin-cli getblockchaininfo { "chain": "main", "blocks": 651540, "headers": 651540, "bestblockhash": "0000000000000000000bc917f7f0f326bb3d63c3399b7b1f503f7126d8168470", "difficulty": 19298087186262.61, "mediantime": 1601998567, "verificationprogress": 0.9999914360960969, "initialblockdownload": false, "chainwork": "00000000000000000000000000000000000000001458b8a8029ab60b7e7a2908", "size_on_disk": 344436513497, "pruned": false, "softforks": { "bip34": { "type": "buried", "active": true, "height": 227931 }, "bip66": { "type": "buried", "active": true, "height": 363725 }, "bip65": { "type": "buried", "active": true, "height": 388381 }, "csv": { "type": "buried", "active": true, "height": 419328 }, "segwit": { "type": "buried", "active": true, "height": 481824 } }, "warnings": "" } 
submitted by tookthisusersoucant to Bitcoin [link] [comments]

Oh yeahhh =D

Oh yeahhh =D submitted by Luckynumba2 to Bitcoin [link] [comments]

Bitcoin Fullnode Install Guide for Dummies ;-)

Bitcoin Fullnode Install Guide for Dummies ;-)
Feel free to stop at Level 0 or Level 1, which is fine. More advanced configs are offered to those with more tech savvy. This guide, obviously assumes a Windows 10 install, but other OSes work fine, just find a different guide. BTW, the "For Dummies" is a callback to a set of "tech" books in the 90's intended to be as easy as possible. It is in jest and not intended to insult the reader. Finally, if you dislike the formatting, a well formatted copy can be found here
There is a fairly small subset of Bitcoin users that run a full node. I think the idea of running a full node has gotten a bad rap over the years since there is so much talk about running on a Raspberry Pi, or getting zippy SSDs. Although all of this can be fun, it is often not really required at all. Here are some ways to run a full node starting with the very simple. I'll get into more complex configs, but these are all optional.

Tech Skill Level: 0 (the basics)

  1. Download Bitcoin Core
  2. Launch the downloaded installer and install the app
  3. Launch the installed "Bitcoin Core" app and let it run overnight
In many cases, thats it. If your running a new machine with a fairly good internet connection, 8 or 9 hours will be enough to complete the "Initial Block Download" (IBD). This may fill up your drive a bit, but again, on most new machines, 300 GB of space isn't that hard to come by.

Tech Skill Level: 1 (encrypted wallet)

One thing we left out in the level-0 exercise is encrypting your wallet. It's easy enough to do well, but a bit more difficult to do right. The main challenge is that humans generate really poor passwords. If you want a good password, the best way is to use something called "diceware". Basically, you just grab 4 or 5 dice and each throw of the dice represents a certain word on a special list. The throw {1,4,5,3,1} for example would be the word camping on the EFF-diceware-wordlist. So you repeat this a few times until you have a list of 8 or so words which becomes the passphrase you use to encrypt your wallet. Write it down, it is always hard to remember at first. So at level-1 your list becomes:
  1. Download Bitcoin Core
  2. Launch the downloaded installer and install the app
  3. Launch the installed "Bitcoin Core" app and let it run overnight
  4. Choose Encrypt Wallet from the Settings menu
  5. Enter your 8 word (or so) passphrase generated using the Diceware method

Wallet Encryption Dialog

Tech Skill Level: 2 (enable pruning if needed)

Though I said "300 GB of space isn't hard to come by", some times it actually is. If space is an issue, a simple way to fix it is to tell bitcoin to simple take less space. This is called "pruning" and can take that number from 300 GB down to below 5 GB. If you can't find 5 GB, then you'll have to read ahead to level-4 to add USB storage. But the good news is, enabling pruning is pretty easy, we just add another step to our working list:
  1. Download Bitcoin Core
  2. Launch the downloaded installer and install the app
  3. Launch the installed "Bitcoin Core" app and let it run overnight
  4. Do the wallet encryption steps here if you wish
  5. Choose Options from the Settings menu
  6. Choose Prune block storage to: and select the max size for the blocks to use
  7. Exit and restart the bitcoin application for the changes to take effect

Pruning Dialog
Note, even setting this to 1 GB will still leave you with about a 4.5 GB install. The blocks take up a lot of space, but the chainstate and other folders eat up at least 3.5 GB and they can't be pruned. Also, be aware, to disable pruning requires you to perform the entire IBD again. While pruned some other functions my be disabled as well, so just know that pruning does limit some functionality.

Tech Skill Level: 3 (verify the installer)

Although this is arguably something that should be done at level-0, some find the intricacies of comparing hash (thumbprint) values to be tedious and beyond the scope of a beginner. You will find these types of hash compares suggested quite often as a way to prevent running tainted programs. Programs are often tainted by bad disk or network performance, but most often, taint is malicious code inserted by viruses or malware. This is a way to guard yourself against those types of attacks.
What I cover here is a very basic comparison on the certificate, but a more thorough verification advised by mosts uses a program called Gpg4Win, and is beyond the scope of this beginners guide. But regardless, most users should strive to do this minimum level of validation.
  1. Download Bitcoin Core
  2. Launch the downloaded installer
  3. When prompted "Do you want to allow..." click Show more details
  4. In the details section select Show information about the publisher's certificate
  5. In the certificate window select the Details tab
  6. In the Details tab Subject should start with "CN = Bitcoin Core Code Signing Association"
  7. Ensure Thumbprint in Details reads ea27d3cefb3eb715ed214176a5d027e01ba1ee86
  8. If the checks pass, click OK to exit the certificate window and Yes to allow the installer to run.
  9. Launch the installed "Bitcoin Core" app and let it run overnight
  10. Do the wallet encryption steps here if you wish
  11. Do the optional pruning steps here if you wish

Certification Validation Windows
Note: The certificate used to sign the current Bitcoin installer is only valid from March 2020 to March 2021. After that point the thumbprint on the certificate will change. This is by design and intentional. If your reading this post after March 2021, then it is understood that the thumbprint has changed.

Tech Skill Level: 4 (use secondary storage)

We glossed over the "new machine with fairly good internet" part. Truth be known many people do not have fairly new machines, and find the IBD to take longer than the "over night" best wishes. For most people the slowdown is the disk access when calculating what is called chainstate. This requires fast random reads and writes to the disk. If you have an SSD disk, this will be no problem, but if you have a non-SSD "spinning" disk, random writes are always slow. Though an SSD will speed things up, they are pricey, so a nice middle ground may be a simple high-end USB key drive. You can get some with 10 to 15 MB/s random writes for $20 on Amazon. This is usually a order of magnitude faster than a "spinning" disk. And with pruning (see level-2), a small USB drive should be fine.
Once you decide on a drive, the tricky part will be to enable external storage. It requires editing a configuration file and adding a line. First, we want to create a directory on the key drive. You will need to determine the drive letter of your USB key drive. For the sake of this example, we will assume it is D:, but you must determine this yourself and correct the example. Once you know the drive letter, create a blank folder on the drive called Bitcoin. So for this example, creating Bitcoin on drive D: will create the path D:\Bitcoin. Once done, assuming that D: is your drive, here are the new steps including the edit of the configuration file:
  1. Download Bitcoin Core
  2. Launch the installer, verify it, then run it
  3. Launch the installed "Bitcoin Core" app and let it run overnight
  4. Do the wallet encryption steps here if you wish
  5. Do the optional pruning steps here if you wish
  6. Launch "Notepad" by typing "Notepad.exe" in the windows search bar then click Open
  7. Type the line datadir=D:\Bitcoin (depending on your drive letter) in the blank file
  8. Choose Save from the File menu in notepad
  9. Type %APPDATA%\Bitcoin\bitcoin.conf (note the percent signs) in the File name box
  10. Select All Files from the Save as type dropdown
  11. Click the Save button and overwrite the file if prompted
  12. Exit and restart the bitcoin application for the changes to take effect

Save As Dialog
Now that you've reached this level of technical expertise, there are many new configuration options that you can begin to modify if you wish. Most configuration data is contained in the bitcoin.conf file and learning how to maintain it is a key step for a node operator.

Tech Skill Level: 5 (all other customizations)

Here's a short list of various things you can ADD to your bitcoin.conf file. You generally just add a new line for each configuration settings.
  • addresstype=bech32
  • changetype=bech32
The addresstype / changetype allows your wallet to use the native-segwit (bech32) format. This is the most efficient and inexpensive way to spend bitcoin, and is a recommended configuration. The default uses something called p2sh-segwit which is more compatible with older wallets, but more expensive to spend.
  • minrelaytxfee=0.00000011
Changing the minrelaytxfee setting allows you to help propagate lower fee transactions. It will require more memory but TXN memory is capped at 300 MB by default anyways, so if you have enough memory, it is a good setting to choose.
  • dbcache=2048
The dbcache setting controls how many MB of memory the program will use for the chainstate database. Since this is a key bottleneck in the IBD, setting this value high (2048 MB) will greatly speed up the IBD, assuming you have the memory to spare
  • blocksdir=C:\Bitcoin
  • datadir=D:\Bitcoin
In level-4 we discussed moving the datadir to a fast external storage, but the majority of the space used for bitcoin is the blocks directory (blocksdir). Although you should always use for fastest storage for datadir, you are free to use slow storage for blocksdir. So if you only want to consume a small amount of your SSD (assumed D:) then you can keep your blocks on your slow "spinning" drive.
  • upnp=1
One of the harder challenges you may face running a node, is to get incoming connections. If you are lucky, you may find that your firewall and network HW support the uPnP protocol. If they do, this setting will allow bitcoin to configure uPnP to allow incoming connections to your node. Other methods exist to make your node reachable, but they are well beyond the scope of this guide.
submitted by brianddk to Bitcoin [link] [comments]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Dragonchain Great Reddit Scaling Bake-Off Public Proposal

Dragonchain Great Reddit Scaling Bake-Off Public Proposal

Dragonchain Public Proposal TL;DR:

Dragonchain has demonstrated twice Reddit’s entire total daily volume (votes, comments, and posts per Reddit 2019 Year in Review) in a 24-hour demo on an operational network. Every single transaction on Dragonchain is decentralized immediately through 5 levels of Dragon Net, and then secured with combined proof on Bitcoin, Ethereum, Ethereum Classic, and Binance Chain, via Interchain. At the time, in January 2020, the entire cost of the demo was approximately $25K on a single system (transaction fees locked at $0.0001/txn). With current fees (lowest fee $0.0000025/txn), this would cost as little as $625.
Watch Joe walk through the entire proposal and answer questions on YouTube.
This proposal is also available on the Dragonchain blog.

Hello Reddit and Ethereum community!

I’m Joe Roets, Founder & CEO of Dragonchain. When the team and I first heard about The Great Reddit Scaling Bake-Off we were intrigued. We believe we have the solutions Reddit seeks for its community points system and we have them at scale.
For your consideration, we have submitted our proposal below. The team at Dragonchain and I welcome and look forward to your technical questions, philosophical feedback, and fair criticism, to build a scaling solution for Reddit that will empower its users. Because our architecture is unlike other blockchain platforms out there today, we expect to receive many questions while people try to grasp our project. I will answer all questions here in this thread on Reddit, and I've answered some questions in the stream on YouTube.
We have seen good discussions so far in the competition. We hope that Reddit’s scaling solution will emerge from The Great Reddit Scaling Bake-Off and that Reddit will have great success with the implementation.

Executive summary

Dragonchain is a robust open source hybrid blockchain platform that has proven to withstand the passing of time since our inception in 2014. We have continued to evolve to harness the scalability of private nodes, yet take full advantage of the security of public decentralized networks, like Ethereum. We have a live, operational, and fully functional Interchain network integrating Bitcoin, Ethereum, Ethereum Classic, and ~700 independent Dragonchain nodes. Every transaction is secured to Ethereum, Bitcoin, and Ethereum Classic. Transactions are immediately usable on chain, and the first decentralization is seen within 20 seconds on Dragon Net. Security increases further to public networks ETH, BTC, and ETC within 10 minutes to 2 hours. Smart contracts can be written in any executable language, offering full freedom to existing developers. We invite any developer to watch the demo, play with our SDK’s, review open source code, and to help us move forward. Dragonchain specializes in scalable loyalty & rewards solutions and has built a decentralized social network on chain, with very affordable transaction costs. This experience can be combined with the insights Reddit and the Ethereum community have gained in the past couple of months to roll out the solution at a rapid pace.

Response and PoC

In The Great Reddit Scaling Bake-Off post, Reddit has asked for a series of demonstrations, requirements, and other considerations. In this section, we will attempt to answer all of these requests.

Live Demo

A live proof of concept showing hundreds of thousands of transactions
On Jan 7, 2020, Dragonchain hosted a 24-hour live demonstration during which a quarter of a billion (250 million+) transactions executed fully on an operational network. Every single transaction on Dragonchain is decentralized immediately through 5 levels of Dragon Net, and then secured with combined proof on Bitcoin, Ethereum, Ethereum Classic, and Binance Chain, via Interchain. This means that every single transaction is secured by, and traceable to these networks. An attack on this system would require a simultaneous attack on all of the Interchained networks.
24 hours in 4 minutes (YouTube):
24 hours in 4 minutes
The demonstration was of a single business system, and any user is able to scale this further, by running multiple systems simultaneously. Our goals for the event were to demonstrate a consistent capacity greater than that of Visa over an extended time period.
Tooling to reproduce our demo is available here:
https://github.com/dragonchain/spirit-bomb

Source Code

Source code (for on & off-chain components as well tooling used for the PoC). The source code does not have to be shared publicly, but if Reddit decides to use a particular solution it will need to be shared with Reddit at some point.

Scaling

How it works & scales

Architectural Scaling

Dragonchain’s architecture attacks the scalability issue from multiple angles. Dragonchain is a hybrid blockchain platform, wherein every transaction is protected on a business node to the requirements of that business or purpose. A business node may be held completely private or may be exposed or replicated to any level of exposure desired.
Every node has its own blockchain and is independently scalable. Dragonchain established Context Based Verification as its consensus model. Every transaction is immediately usable on a trust basis, and in time is provable to an increasing level of decentralized consensus. A transaction will have a level of decentralization to independently owned and deployed Dragonchain nodes (~700 nodes) within seconds, and full decentralization to BTC and ETH within minutes or hours. Level 5 nodes (Interchain nodes) function to secure all transactions to public or otherwise external chains such as Bitcoin and Ethereum. These nodes scale the system by aggregating multiple blocks into a single Interchain transaction on a cadence. This timing is configurable based upon average fees for each respective chain. For detailed information about Dragonchain’s architecture, and Context Based Verification, please refer to the Dragonchain Architecture Document.

Economic Scaling

An interesting feature of Dragonchain’s network consensus is its economics and scarcity model. Since Dragon Net nodes (L2-L4) are independent staking nodes, deployment to cloud platforms would allow any of these nodes to scale to take on a large percentage of the verification work. This is great for scalability, but not good for the economy, because there is no scarcity, and pricing would develop a downward spiral and result in fewer verification nodes. For this reason, Dragonchain uses TIME as scarcity.
TIME is calculated as the number of Dragons held, multiplied by the number of days held. TIME influences the user’s access to features within the Dragonchain ecosystem. It takes into account both the Dragon balance and length of time each Dragon is held. TIME is staked by users against every verification node and dictates how much of the transaction fees are awarded to each participating node for every block.
TIME also dictates the transaction fee itself for the business node. TIME is staked against a business node to set a deterministic transaction fee level (see transaction fee table below in Cost section). This is very interesting in a discussion about scaling because it guarantees independence for business implementation. No matter how much traffic appears on the entire network, a business is guaranteed to not see an increased transaction fee rate.

Scaled Deployment

Dragonchain uses Docker and Kubernetes to allow the use of best practices traditional system scaling. Dragonchain offers managed nodes with an easy to use web based console interface. The user may also deploy a Dragonchain node within their own datacenter or favorite cloud platform. Users have deployed Dragonchain nodes on-prem on Amazon AWS, Google Cloud, MS Azure, and other hosting platforms around the world. Any executable code, anything you can write, can be written into a smart contract. This flexibility is what allows us to say that developers with no blockchain experience can use any code language to access the benefits of blockchain. Customers have used NodeJS, Python, Java, and even BASH shell script to write smart contracts on Dragonchain.
With Docker containers, we achieve better separation of concerns, faster deployment, higher reliability, and lower response times.
We chose Kubernetes for its self-healing features, ability to run multiple services on one server, and its large and thriving development community. It is resilient, scalable, and automated. OpenFaaS allows us to package smart contracts as Docker images for easy deployment.
Contract deployment time is now bounded only by the size of the Docker image being deployed but remains fast even for reasonably large images. We also take advantage of Docker’s flexibility and its ability to support any language that can run on x86 architecture. Any image, public or private, can be run as a smart contract using Dragonchain.

Flexibility in Scaling

Dragonchain’s architecture considers interoperability and integration as key features. From inception, we had a goal to increase adoption via integration with real business use cases and traditional systems.
We envision the ability for Reddit, in the future, to be able to integrate alternate content storage platforms or other financial services along with the token.
  • LBRY - To allow users to deploy content natively to LBRY
  • MakerDAO to allow users to lend small amounts backed by their Reddit community points.
  • STORJ/SIA to allow decentralized on chain storage of portions of content. These integrations or any other are relatively easy to integrate on Dragonchain with an Interchain implementation.

Cost

Cost estimates (on-chain and off-chain) For the purpose of this proposal, we assume that all transactions are on chain (posts, replies, and votes).
On the Dragonchain network, transaction costs are deterministic/predictable. By staking TIME on the business node (as described above) Reddit can reduce transaction costs to as low as $0.0000025 per transaction.
Dragonchain Fees Table

Getting Started

How to run it
Building on Dragonchain is simple and requires no blockchain experience. Spin up a business node (L1) in our managed environment (AWS), run it in your own cloud environment, or on-prem in your own datacenter. Clear documentation will walk you through the steps of spinning up your first Dragonchain Level 1 Business node.
Getting started is easy...
  1. Download Dragonchain’s dctl
  2. Input three commands into a terminal
  3. Build an image
  4. Run it
More information can be found in our Get started documents.

Architecture
Dragonchain is an open source hybrid platform. Through Dragon Net, each chain combines the power of a public blockchain (like Ethereum) with the privacy of a private blockchain.
Dragonchain organizes its network into five separate levels. A Level 1, or business node, is a totally private blockchain only accessible through the use of public/private keypairs. All business logic, including smart contracts, can be executed on this node directly and added to the chain.
After creating a block, the Level 1 business node broadcasts a version stripped of sensitive private data to Dragon Net. Three Level 2 Validating nodes validate the transaction based on guidelines determined from the business. A Level 3 Diversity node checks that the level 2 nodes are from a diverse array of locations. A Level 4 Notary node, hosted by a KYC partner, then signs the validation record received from the Level 3 node. The transaction hash is ledgered to the Level 5 public chain to take advantage of the hash power of massive public networks.
Dragon Net can be thought of as a “blockchain of blockchains”, where every level is a complete private blockchain. Because an L1 can send to multiple nodes on a single level, proof of existence is distributed among many places in the network. Eventually, proof of existence reaches level 5 and is published on a public network.

API Documentation

APIs (on chain & off)

SDK Source

Nobody’s Perfect

Known issues or tradeoffs
  • Dragonchain is open source and even though the platform is easy enough for developers to code in any language they are comfortable with, we do not have so large a developer community as Ethereum. We would like to see the Ethereum developer community (and any other communities) become familiar with our SDK’s, our solutions, and our platform, to unlock the full potential of our Ethereum Interchain. Long ago we decided to prioritize both Bitcoin and Ethereum Interchains. We envision an ecosystem that encompasses different projects to give developers the ability to take full advantage of all the opportunities blockchain offers to create decentralized solutions not only for Reddit but for all of our current platforms and systems. We believe that together we will take the adoption of blockchain further. We currently have additional Interchain with Ethereum Classic. We look forward to Interchain with other blockchains in the future. We invite all blockchains projects who believe in decentralization and security to Interchain with Dragonchain.
  • While we only have 700 nodes compared to 8,000 Ethereum and 10,000 Bitcoin nodes. We harness those 18,000 nodes to scale to extremely high levels of security. See Dragonchain metrics.
  • Some may consider the centralization of Dragonchain’s business nodes as an issue at first glance, however, the model is by design to protect business data. We do not consider this a drawback as these nodes can make any, none, or all data public. Depending upon the implementation, every subreddit could have control of its own business node, for potential business and enterprise offerings, bringing new alternative revenue streams to Reddit.

Costs and resources

Summary of cost & resource information for both on-chain & off-chain components used in the PoC, as well as cost & resource estimates for further scaling. If your PoC is not on mainnet, make note of any mainnet caveats (such as congestion issues).
Every transaction on the PoC system had a transaction fee of $0.0001 (one-hundredth of a cent USD). At 256MM transactions, the demo cost $25,600. With current operational fees, the same demonstration would cost $640 USD.
For the demonstration, to achieve throughput to mimic a worldwide payments network, we modeled several clients in AWS and 4-5 business nodes to handle the traffic. The business nodes were tuned to handle higher throughput by adjusting memory and machine footprint on AWS. This flexibility is valuable to implementing a system such as envisioned by Reddit. Given that Reddit’s daily traffic (posts, replies, and votes) is less than half that of our demo, we would expect that the entire Reddit system could be handled on 2-5 business nodes using right-sized containers on AWS or similar environments.
Verification was accomplished on the operational Dragon Net network with over 700 independently owned verification nodes running around the world at no cost to the business other than paid transaction fees.

Requirements

Scaling

This PoC should scale to the numbers below with minimal costs (both on & off-chain). There should also be a clear path to supporting hundreds of millions of users.
Over a 5 day period, your scaling PoC should be able to handle:
*100,000 point claims (minting & distributing points) *25,000 subscriptions *75,000 one-off points burning *100,000 transfers
During Dragonchain’s 24 hour demo, the above required numbers were reached within the first few minutes.
Reddit’s total activity is 9000% more than Ethereum’s total transaction level. Even if you do not include votes, it is still 700% more than Ethereum’s current volume. Dragonchain has demonstrated that it can handle 250 million transactions a day, and it’s architecture allows for multiple systems to work at that level simultaneously. In our PoC, we demonstrate double the full capacity of Reddit, and every transaction was proven all the way to Bitcoin and Ethereum.
Reddit Scaling on Ethereum

Decentralization

Solutions should not depend on any single third-party provider. We prefer solutions that do not depend on specific entities such as Reddit or another provider, and solutions with no single point of control or failure in off-chain components but recognize there are numerous trade-offs to consider
Dragonchain’s architecture calls for a hybrid approach. Private business nodes hold the sensitive data while the validation and verification of transactions for the business are decentralized within seconds and secured to public blockchains within 10 minutes to 2 hours. Nodes could potentially be controlled by owners of individual subreddits for more organic decentralization.
  • Billing is currently centralized - there is a path to federation and decentralization of a scaled billing solution.
  • Operational multi-cloud
  • Operational on-premises capabilities
  • Operational deployment to any datacenter
  • Over 700 independent Community Verification Nodes with proof of ownership
  • Operational Interchain (Interoperable to Bitcoin, Ethereum, and Ethereum Classic, open to more)

Usability Scaling solutions should have a simple end user experience.

Users shouldn't have to maintain any extra state/proofs, regularly monitor activity, keep track of extra keys, or sign anything other than their normal transactions
Dragonchain and its customers have demonstrated extraordinary usability as a feature in many applications, where users do not need to know that the system is backed by a live blockchain. Lyceum is one of these examples, where the progress of academy courses is being tracked, and successful completion of courses is rewarded with certificates on chain. Our @Save_The_Tweet bot is popular on Twitter. When used with one of the following hashtags - #please, #blockchain, #ThankYou, or #eternalize the tweet is saved through Eternal to multiple blockchains. A proof report is available for future reference. Other examples in use are DEN, our decentralized social media platform, and our console, where users can track their node rewards, view their TIME, and operate a business node.
Examples:

Transactions complete in a reasonable amount of time (seconds or minutes, not hours or days)
All transactions are immediately usable on chain by the system. A transaction begins the path to decentralization at the conclusion of a 5-second block when it gets distributed across 5 separate community run nodes. Full decentralization occurs within 10 minutes to 2 hours depending on which interchain (Bitcoin, Ethereum, or Ethereum Classic) the transaction hits first. Within approximately 2 hours, the combined hash power of all interchained blockchains secures the transaction.

Free to use for end users (no gas fees, or fixed/minimal fees that Reddit can pay on their behalf)
With transaction pricing as low as $0.0000025 per transaction, it may be considered reasonable for Reddit to cover transaction fees for users.
All of Reddit's Transactions on Blockchain (month)
Community points can be earned by users and distributed directly to their Reddit account in batch (as per Reddit minting plan), and allow users to withdraw rewards to their Ethereum wallet whenever they wish. Withdrawal fees can be paid by either user or Reddit. This model has been operating inside the Dragonchain system since 2018, and many security and financial compliance features can be optionally added. We feel that this capability greatly enhances user experience because it is seamless to a regular user without cryptocurrency experience, yet flexible to a tech savvy user. With regard to currency or token transactions, these would occur on the Reddit network, verified to BTC and ETH. These transactions would incur the $0.0000025 transaction fee. To estimate this fee we use the monthly active Reddit users statista with a 60% adoption rate and an estimated 10 transactions per month average resulting in an approximate $720 cost across the system. Reddit could feasibly incur all associated internal network charges (mining/minting, transfer, burn) as these are very low and controllable fees.
Reddit Internal Token Transaction Fees

Reddit Ethereum Token Transaction Fees
When we consider further the Ethereum fees that might be incurred, we have a few choices for a solution.
  1. Offload all Ethereum transaction fees (user withdrawals) to interested users as they wish to withdraw tokens for external use or sale.
  2. Cover Ethereum transaction fees by aggregating them on a timed schedule. Users would request withdrawal (from Reddit or individual subreddits), and they would be transacted on the Ethereum network every hour (or some other schedule).
  3. In a combination of the above, customers could cover aggregated fees.
  4. Integrate with alternate Ethereum roll up solutions or other proposals to aggregate minting and distribution transactions onto Ethereum.

Bonus Points

Users should be able to view their balances & transactions via a blockchain explorer-style interface
From interfaces for users who have no knowledge of blockchain technology to users who are well versed in blockchain terms such as those present in a typical block explorer, a system powered by Dragonchain has flexibility on how to provide balances and transaction data to users. Transactions can be made viewable in an Eternal Proof Report, which displays raw data along with TIME staking information and traceability all the way to Bitcoin, Ethereum, and every other Interchained network. The report shows fields such as transaction ID, timestamp, block ID, multiple verifications, and Interchain proof. See example here.
Node payouts within the Dragonchain console are listed in chronological order and can be further seen in either Dragons or USD. See example here.
In our social media platform, Dragon Den, users can see, in real-time, their NRG and MTR balances. See example here.
A new influencer app powered by Dragonchain, Raiinmaker, breaks down data into a user friendly interface that shows coin portfolio, redeemed rewards, and social scores per campaign. See example here.

Exiting is fast & simple
Withdrawing funds on Dragonchain’s console requires three clicks, however, withdrawal scenarios with more enhanced security features per Reddit’s discretion are obtainable.

Interoperability Compatibility with third party apps (wallets/contracts/etc) is necessary.
Proven interoperability at scale that surpasses the required specifications. Our entire platform consists of interoperable blockchains connected to each other and traditional systems. APIs are well documented. Third party permissions are possible with a simple smart contract without the end user being aware. No need to learn any specialized proprietary language. Any code base (not subsets) is usable within a Docker container. Interoperable with any blockchain or traditional APIs. We’ve witnessed relatively complex systems built by engineers with no blockchain or cryptocurrency experience. We’ve also demonstrated the creation of smart contracts within minutes built with BASH shell and Node.js. Please see our source code and API documentation.

Scaling solutions should be extensible and allow third parties to build on top of it Open source and extensible
APIs should be well documented and stable

Documentation should be clear and complete
For full documentation, explore our docs, SDK’s, Github repo’s, architecture documents, original Disney documentation, and other links or resources provided in this proposal.

Third-party permissionless integrations should be possible & straightforward Smart contracts are Docker based, can be written in any language, use full language (not subsets), and can therefore be integrated with any system including traditional system APIs. Simple is better. Learning an uncommon or proprietary language should not be necessary.
Advanced knowledge of mathematics, cryptography, or L2 scaling should not be required. Compatibility with common utilities & toolchains is expected.
Dragonchain business nodes and smart contracts leverage Docker to allow the use of literally any language or executable code. No proprietary language is necessary. We’ve witnessed relatively complex systems built by engineers with no blockchain or cryptocurrency experience. We’ve also demonstrated the creation of smart contracts within minutes built with BASH shell and Node.js.

Bonus

Bonus Points: Show us how it works. Do you have an idea for a cool new use case for Community Points? Build it!

TIME

Community points could be awarded to Reddit users based upon TIME too, whereas the longer someone is part of a subreddit, the more community points someone naturally gained, even if not actively commenting or sharing new posts. A daily login could be required for these community points to be credited. This grants awards to readers too and incentivizes readers to create an account on Reddit if they browse the website often. This concept could also be leveraged to provide some level of reputation based upon duration and consistency of contribution to a community subreddit.

Dragon Den

Dragonchain has already built a social media platform that harnesses community involvement. Dragon Den is a decentralized community built on the Dragonchain blockchain platform. Dragon Den is Dragonchain’s answer to fake news, trolling, and censorship. It incentivizes the creation and evaluation of quality content within communities. It could be described as being a shareholder of a subreddit or Reddit in its entirety. The more your subreddit is thriving, the more rewarding it will be. Den is currently in a public beta and in active development, though the real token economy is not live yet. There are different tokens for various purposes. Two tokens are Lair Ownership Rights (LOR) and Lair Ownership Tokens (LOT). LOT is a non-fungible token for ownership of a specific Lair. LOT will only be created and converted from LOR.
Energy (NRG) and Matter (MTR) work jointly. Your MTR determines how much NRG you receive in a 24-hour period. Providing quality content, or evaluating content will earn MTR.

Security. Users have full ownership & control of their points.
All community points awarded based upon any type of activity or gift, are secured and provable to all Interchain networks (currently BTC, ETH, ETC). Users are free to spend and withdraw their points as they please, depending on the features Reddit wants to bring into production.

Balances and transactions cannot be forged, manipulated, or blocked by Reddit or anyone else
Users can withdraw their balance to their ERC20 wallet, directly through Reddit. Reddit can cover the fees on their behalf, or the user covers this with a portion of their balance.

Users should own their points and be able to get on-chain ERC20 tokens without permission from anyone else
Through our console users can withdraw their ERC20 rewards. This can be achieved on Reddit too. Here is a walkthrough of our console, though this does not show the quick withdrawal functionality, a user can withdraw at any time. https://www.youtube.com/watch?v=aNlTMxnfVHw

Points should be recoverable to on-chain ERC20 tokens even if all third-parties involved go offline
If necessary, signed transactions from the Reddit system (e.g. Reddit + Subreddit) can be sent to the Ethereum smart contract for minting.

A public, third-party review attesting to the soundness of the design should be available
To our knowledge, at least two large corporations, including a top 3 accounting firm, have conducted positive reviews. These reviews have never been made public, as Dragonchain did not pay or contract for these studies to be released.

Bonus points
Public, third-party implementation review available or in progress
See above

Compatibility with HSMs & hardware wallets
For the purpose of this proposal, all tokenization would be on the Ethereum network using standard token contracts and as such, would be able to leverage all hardware wallet and Ethereum ecosystem services.

Other Considerations

Minting/distributing tokens is not performed by Reddit directly
This operation can be automated by smart contract on Ethereum. Subreddits can if desired have a role to play.

One off point burning, as well as recurring, non-interactive point burning (for subreddit memberships) should be possible and scalable
This is possible and scalable with interaction between Dragonchain Reddit system and Ethereum token contract(s).

Fully open-source solutions are strongly preferred
Dragonchain is fully open source (see section on Disney release after conclusion).

Conclusion

Whether it is today, or in the future, we would like to work together to bring secure flexibility to the highest standards. It is our hope to be considered by Ethereum, Reddit, and other integrative solutions so we may further discuss the possibilities of implementation. In our public demonstration, 256 million transactions were handled in our operational network on chain in 24 hours, for the low cost of $25K, which if run today would cost $625. Dragonchain’s interoperable foundation provides the atmosphere necessary to implement a frictionless community points system. Thank you for your consideration of our proposal. We look forward to working with the community to make something great!

Disney Releases Blockchain Platform as Open Source

The team at Disney created the Disney Private Blockchain Platform. The system was a hybrid interoperable blockchain platform for ledgering and smart contract development geared toward solving problems with blockchain adoption and usability. All objective evaluation would consider the team’s output a success. We released a list of use cases that we explored in some capacity at Disney, and our input on blockchain standardization as part of our participation in the W3C Blockchain Community Group.
https://lists.w3.org/Archives/Public/public-blockchain/2016May/0052.html

Open Source

In 2016, Roets proposed to release the platform as open source to spread the technology outside of Disney, as others within the W3C group were interested in the solutions that had been created inside of Disney.
Following a long process, step by step, the team met requirements for release. Among the requirements, the team had to:
  • Obtain VP support and approval for the release
  • Verify ownership of the software to be released
  • Verify that no proprietary content would be released
  • Convince the organization that there was a value to the open source community
  • Convince the organization that there was a value to Disney
  • Offer the plan for ongoing maintenance of the project outside of Disney
  • Itemize competing projects
  • Verify no conflict of interest
  • Preferred license
  • Change the project name to not use the name Disney, any Disney character, or any other associated IP - proposed Dragonchain - approved
  • Obtain legal approval
  • Approval from corporate, parks, and other business units
  • Approval from multiple Disney patent groups Copyright holder defined by Disney (Disney Connected and Advanced Technologies)
  • Trademark searches conducted for the selected name Dragonchain
  • Obtain IT security approval
  • Manual review of OSS components conducted
  • OWASP Dependency and Vulnerability Check Conducted
  • Obtain technical (software) approval
  • Offer management, process, and financial plans for the maintenance of the project.
  • Meet list of items to be addressed before release
  • Remove all Disney project references and scripts
  • Create a public distribution list for email communications
  • Remove Roets’ direct and internal contact information
  • Create public Slack channel and move from Disney slack channels
  • Create proper labels for issue tracking
  • Rename internal private Github repository
  • Add informative description to Github page
  • Expand README.md with more specific information
  • Add information beyond current “Blockchains are Magic”
  • Add getting started sections and info on cloning/forking the project
  • Add installation details
  • Add uninstall process
  • Add unit, functional, and integration test information
  • Detail how to contribute and get involved
  • Describe the git workflow that the project will use
  • Move to public, non-Disney git repository (Github or Bitbucket)
  • Obtain Disney Open Source Committee approval for release
On top of meeting the above criteria, as part of the process, the maintainer of the project had to receive the codebase on their own personal email and create accounts for maintenance (e.g. Github) with non-Disney accounts. Given the fact that the project spanned multiple business units, Roets was individually responsible for its ongoing maintenance. Because of this, he proposed in the open source application to create a non-profit organization to hold the IP and maintain the project. This was approved by Disney.
The Disney Open Source Committee approved the application known as OSSRELEASE-10, and the code was released on October 2, 2016. Disney decided to not issue a press release.
Original OSSRELASE-10 document

Dragonchain Foundation

The Dragonchain Foundation was created on January 17, 2017. https://den.social/l/Dragonchain/24130078352e485d96d2125082151cf0/dragonchain-and-disney/
submitted by j0j0r0 to ethereum [link] [comments]

[Suggestion] Getting People to Use the Blockchain Without Realizing It Is the Best Way to Bring Mass Adoption!

With the way cryptocurrencies are right now, it seems that the entire market is taking an "investment first" approach, and holding coins as a part of their "portfolio" instead of actually using them to spend on goods and services (as cash). When most people think of Bitcoin, they think of it as an "investment" or "digital gold", and this incentivizes them to hold their coins rather than use them. It encourages low velocity of money which is bad for the security of the network. As the block reward goes to 0, transaction fees are needed to support the miners. With the investment approach to blockchains and cryptocurrency, it seems like the peer-to-peer cash use-case of crypto has more or less 'vanished'.
This made me think about how the cash use-case could potentially come back in cryptocurrency, and it gave me an idea: make people use Bitcoin Cash as peer-to-peer cash without realizing it. I looked through some old posts in btc and a post by reddit user singularity87 stood out to me: making the standard denomination "bits" to refer to 1/1,000,000th of a BCH, and changing the ticker to "BIT". While I don't agree with the ticker, I think the idea of having the standard denomination changed to bits is a great idea for the use-cases of apps. This can technically be integrated seamlessly is a way where people don't know they're using BCH, but they're using it.
An example would be a social media website, similar to read.cash or member.cash, but everything is denominated in bits, including tipping and wallet balances. With the value of a "bit" being small, people will not really think of it as an investment, but rather "internet change" or "tokens". This will incentivize them to spend their coins on tipping and subsidize fees on the network. When they receive their bits, they are free to withdraw them, and cash out using many nethods such as "PayPal", "Zelle", "Venmo", or "CashApp". The experience should be sealmess, so that people are incentivized to use the app, and it creates a stronger fiat on-ramp.
If a user wants to withdraw their bits, they can download a wallet app that stores bits. When opening the wallet app, they register a cash account and can send to other cash accounts, which is far more intuitive than the current address formats. It would be similar to adding someone on facebook, where the is a search engine that shows results as you enter the cash account names. On top of this, I think it would be nice to give users the choice to pay fees in percentage (to support the network), or pay by transaction size.
submitted by 1MightBeAPenguin to btc [link] [comments]

Technical: The Path to Taproot Activation

Taproot! Everybody wants to have it, somebody wants to make it, nobody knows how to get it!
(If you are asking why everybody wants it, see: Technical: Taproot: Why Activate?)
(Pedants: I mostly elide over lockin times)
Briefly, Taproot is that neat new thing that gets us:
So yes, let's activate taproot!

The SegWit Wars

The biggest problem with activating Taproot is PTSD from the previous softfork, SegWit. Pieter Wuille, one of the authors of the current Taproot proposal, has consistently held the position that he will not discuss activation, and will accept whatever activation process is imposed on Taproot. Other developers have expressed similar opinions.
So what happened with SegWit activation that was so traumatic? SegWit used the BIP9 activation method. Let's dive into BIP9!

BIP9 Miner-Activated Soft Fork

Basically, BIP9 has a bunch of parameters:
Now there are other parameters (name, starttime) but they are not anywhere near as important as the above two.
A number that is not a parameter, is 95%. Basically, activation of a BIP9 softfork is considered as actually succeeding if at least 95% of blocks in the last 2 weeks had the specified bit in the nVersion set. If less than 95% had this bit set before the timeout, then the upgrade fails and never goes into the network. This is not a parameter: it is a constant defined by BIP9, and developers using BIP9 activation cannot change this.
So, first some simple questions and their answers:

The Great Battles of the SegWit Wars

SegWit not only fixed transaction malleability, it also created a practical softforkable blocksize increase that also rebalanced weights so that the cost of spending a UTXO is about the same as the cost of creating UTXOs (and spending UTXOs is "better" since it limits the size of the UTXO set that every fullnode has to maintain).
So SegWit was written, the activation was decided to be BIP9, and then.... miner signalling stalled at below 75%.
Thus were the Great SegWit Wars started.

BIP9 Feature Hostage

If you are a miner with at least 5% global hashpower, you can hold a BIP9-activated softfork hostage.
You might even secretly want the softfork to actually push through. But you might want to extract concession from the users and the developers. Like removing the halvening. Or raising or even removing the block size caps (which helps larger miners more than smaller miners, making it easier to become a bigger fish that eats all the smaller fishes). Or whatever.
With BIP9, you can hold the softfork hostage. You just hold out and refuse to signal. You tell everyone you will signal, if and only if certain concessions are given to you.
This ability by miners to hold a feature hostage was enabled because of the miner-exit allowed by the timeout on BIP9. Prior to that, miners were considered little more than expendable security guards, paid for the risk they take to secure the network, but not special in the grand scheme of Bitcoin.

Covert ASICBoost

ASICBoost was a novel way of optimizing SHA256 mining, by taking advantage of the structure of the 80-byte header that is hashed in order to perform proof-of-work. The details of ASICBoost are out-of-scope here but you can read about it elsewhere
Here is a short summary of the two types of ASICBoost, relevant to the activation discussion.
Now, "overt" means "obvious", while "covert" means hidden. Overt ASICBoost is obvious because nVersion bits that are not currently in use for BIP9 activations are usually 0 by default, so setting those bits to 1 makes it obvious that you are doing something weird (namely, Overt ASICBoost). Covert ASICBoost is non-obvious because the order of transactions in a block are up to the miner anyway, so the miner rearranging the transactions in order to get lower power consumption is not going to be detected.
Unfortunately, while Overt ASICBoost was compatible with SegWit, Covert ASICBoost was not. This is because, pre-SegWit, only the block header Merkle tree committed to the transaction ordering. However, with SegWit, another Merkle tree exists, which commits to transaction ordering as well. Covert ASICBoost would require more computation to manipulate two Merkle trees, obviating the power benefits of Covert ASICBoost anyway.
Now, miners want to use ASICBoost (indeed, about 60->70% of current miners probably use the Overt ASICBoost nowadays; if you have a Bitcoin fullnode running you will see the logs with lots of "60 of last 100 blocks had unexpected versions" which is exactly what you would see with the nVersion manipulation that Overt ASICBoost does). But remember: ASICBoost was, at around the time, a novel improvement. Not all miners had ASICBoost hardware. Those who did, did not want it known that they had ASICBoost hardware, and wanted to do Covert ASICBoost!
But Covert ASICBoost is incompatible with SegWit, because SegWit actually has two Merkle trees of transaction data, and Covert ASICBoost works by fudging around with transaction ordering in a block, and recomputing two Merkle Trees is more expensive than recomputing just one (and loses the ASICBoost advantage).
Of course, those miners that wanted Covert ASICBoost did not want to openly admit that they had ASICBoost hardware, they wanted to keep their advantage secret because miners are strongly competitive in a very tight market. And doing ASICBoost Covertly was just the ticket, but they could not work post-SegWit.
Fortunately, due to the BIP9 activation process, they could hold SegWit hostage while covertly taking advantage of Covert ASICBoost!

UASF: BIP148 and BIP8

When the incompatibility between Covert ASICBoost and SegWit was realized, still, activation of SegWit stalled, and miners were still not openly claiming that ASICBoost was related to non-activation of SegWit.
Eventually, a new proposal was created: BIP148. With this rule, 3 months before the end of the SegWit timeout, nodes would reject blocks that did not signal SegWit. Thus, 3 months before SegWit timeout, BIP148 would force activation of SegWit.
This proposal was not accepted by Bitcoin Core, due to the shortening of the timeout (it effectively times out 3 months before the initial SegWit timeout). Instead, a fork of Bitcoin Core was created which added the patch to comply with BIP148. This was claimed as a User Activated Soft Fork, UASF, since users could freely download the alternate fork rather than sticking with the developers of Bitcoin Core.
Now, BIP148 effectively is just a BIP9 activation, except at its (earlier) timeout, the new rules would be activated anyway (instead of the BIP9-mandated behavior that the upgrade is cancelled at the end of the timeout).
BIP148 was actually inspired by the BIP8 proposal (the link here is a historical version; BIP8 has been updated recently, precisely in preparation for Taproot activation). BIP8 is basically BIP9, but at the end of timeout, the softfork is activated anyway rather than cancelled.
This removed the ability of miners to hold the softfork hostage. At best, they can delay the activation, but not stop it entirely by holding out as in BIP9.
Of course, this implies risk that not all miners have upgraded before activation, leading to possible losses for SPV users, as well as again re-pressuring miners to signal activation, possibly without the miners actually upgrading their software to properly impose the new softfork rules.

BIP91, SegWit2X, and The Aftermath

BIP148 inspired countermeasures, possibly from the Covert ASiCBoost miners, possibly from concerned users who wanted to offer concessions to miners. To this day, the common name for BIP148 - UASF - remains an emotionally-charged rallying cry for parts of the Bitcoin community.
One of these was SegWit2X. This was brokered in a deal between some Bitcoin personalities at a conference in New York, and thus part of the so-called "New York Agreement" or NYA, another emotionally-charged acronym.
The text of the NYA was basically:
  1. Set up a new activation threshold at 80% signalled at bit 4 (vs bit 1 for SegWit).
    • When this 80% signalling was reached, miners would require that bit 1 for SegWit be signalled to achive the 95% activation needed for SegWit.
  2. If the bit 4 signalling reached 80%, increase the block weight limit from the SegWit 4000000 to the SegWit2X 8000000, 6 months after bit 1 activation.
The first item above was coded in BIP91.
Unfortunately, if you read the BIP91, independently of NYA, you might come to the conclusion that BIP91 was only about lowering the threshold to 80%. In particular, BIP91 never mentions anything about the second point above, it never mentions that bit 4 80% threshold would also signal for a later hardfork increase in weight limit.
Because of this, even though there are claims that NYA (SegWit2X) reached 80% dominance, a close reading of BIP91 shows that the 80% dominance was only for SegWit activation, without necessarily a later 2x capacity hardfork (SegWit2X).
This ambiguity of bit 4 (NYA says it includes a 2x capacity hardfork, BIP91 says it does not) has continued to be a thorn in blocksize debates later. Economically speaking, Bitcoin futures between SegWit and SegWit2X showed strong economic dominance in favor of SegWit (SegWit2X futures were traded at a fraction in value of SegWit futures: I personally made a tidy but small amount of money betting against SegWit2X in the futures market), so suggesting that NYA achieved 80% dominance even in mining is laughable, but the NYA text that ties bit 4 to SegWit2X still exists.
Historically, BIP91 triggered which caused SegWit to activate before the BIP148 shorter timeout. BIP148 proponents continue to hold this day that it was the BIP148 shorter timeout and no-compromises-activate-on-August-1 that made miners flock to BIP91 as a face-saving tactic that actually removed the second clause of NYA. NYA supporters keep pointing to the bit 4 text in the NYA and the historical activation of BIP91 as a failed promise by Bitcoin developers.

Taproot Activation Proposals

There are two primary proposals I can see for Taproot activation:
  1. BIP8.
  2. Modern Softfork Activation.
We have discussed BIP8: roughly, it has bit and timeout, if 95% of miners signal bit it activates, at the end of timeout it activates. (EDIT: BIP8 has had recent updates: at the end of timeout it can now activate or fail. For the most part, in the below text "BIP8", means BIP8-and-activate-at-timeout, and "BIP9" means BIP8-and-fail-at-timeout)
So let's take a look at Modern Softfork Activation!

Modern Softfork Activation

This is a more complex activation method, composed of BIP9 and BIP8 as supcomponents.
  1. First have a 12-month BIP9 (fail at timeout).
  2. If the above fails to activate, have a 6-month discussion period during which users and developers and miners discuss whether to continue to step 3.
  3. Have a 24-month BIP8 (activate at timeout).
The total above is 42 months, if you are counting: 3.5 years worst-case activation.
The logic here is that if there are no problems, BIP9 will work just fine anyway. And if there are problems, the 6-month period should weed it out. Finally, miners cannot hold the feature hostage since the 24-month BIP8 period will exist anyway.

PSA: Being Resilient to Upgrades

Software is very birttle.
Anyone who has been using software for a long time has experienced something like this:
  1. You hear a new version of your favorite software has a nice new feature.
  2. Excited, you install the new version.
  3. You find that the new version has subtle incompatibilities with your current workflow.
  4. You are sad and downgrade to the older version.
  5. You find out that the new version has changed your files in incompatible ways that the old version cannot work with anymore.
  6. You tearfully reinstall the newer version and figure out how to get your lost productivity now that you have to adapt to a new workflow
If you are a technically-competent user, you might codify your workflow into a bunch of programs. And then you upgrade one of the external pieces of software you are using, and find that it has a subtle incompatibility with your current workflow which is based on a bunch of simple programs you wrote yourself. And if those simple programs are used as the basis of some important production system, you hve just screwed up because you upgraded software on an important production system.
And well, one of the issues with new softfork activation is that if not enough people (users and miners) upgrade to the newest Bitcoin software, the security of the new softfork rules are at risk.
Upgrading software of any kind is always a risk, and the more software you build on top of the software-being-upgraded, the greater you risk your tower of software collapsing while you change its foundations.
So if you have some complex Bitcoin-manipulating system with Bitcoin somewhere at the foundations, consider running two Bitcoin nodes:
  1. One is a "stable-version" Bitcoin node. Once it has synced, set it up to connect=x.x.x.x to the second node below (so that your ISP bandwidth is only spent on the second node). Use this node to run all your software: it's a stable version that you don't change for long periods of time. Enable txiindex, disable pruning, whatever your software needs.
  2. The other is an "always-up-to-date" Bitcoin Node. Keep its stoarge down with pruning (initially sync it off the "stable-version" node). You can't use blocksonly if your "stable-version" node needs to send transactions, but otherwise this "always-up-to-date" Bitcoin node can be kept as a low-resource node, so you can run both nodes in the same machine.
When a new Bitcoin version comes up, you just upgrade the "always-up-to-date" Bitcoin node. This protects you if a future softfork activates, you will only receive valid Bitcoin blocks and transactions. Since this node has nothing running on top of it, it is just a special peer of the "stable-version" node, any software incompatibilities with your system software do not exist.
Your "stable-version" Bitcoin node remains the same version until you are ready to actually upgrade this node and are prepared to rewrite most of the software you have running on top of it due to version compatibility problems.
When upgrading the "always-up-to-date", you can bring it down safely and then start it later. Your "stable-version" wil keep running, disconnected from the network, but otherwise still available for whatever queries. You do need some system to stop the "always-up-to-date" node if for any reason the "stable-version" goes down (otherwisee if the "always-up-to-date" advances its pruning window past what your "stable-version" has, the "stable-version" cannot sync afterwards), but if you are technically competent enough that you need to do this, you are technically competent enough to write such a trivial monitor program (EDIT: gmax notes you can adjust the pruning window by RPC commands to help with this as well).
This recommendation is from gmaxwell on IRC, by the way.
submitted by almkglor to Bitcoin [link] [comments]

Mainnet project: an important change. If you are a donor, please read.

Hi everybody.
It has been one week since the mainnet project got the funding and I have an important update to make.
A little bit about the progress: I've found a wonderful developer, who is helping with the library, so it is starting to take some shape. I'm ironing out our REST API, got some useful feedback, continuing to do so. About 0.17% of the total funding spent so far.
The important update though is that I have decided to take the development and spending private, instead of public. Before I explain what that means and why, I understand that it might upset some donors. So, if you have pledged any amount and disagree with my change for any reason - please contact me (DM, or [email protected]) and I'll refund your pledge completely, no questions asked.
(Please sign any message using the address that you used to prove that you sent the funds, see the list of donors here to find your pledge and the link the the funding donation to find which address you sent from).
If more than 50% of pledges ask for money back, I'll just return everything to everybody in full and we'll consider the project cancelled. At that point anyone willing to take on the project (via a new Flipstarter or something), I'll donate the domain to them. Everything that is done so far is MIT licensed, so anyone is free to take it at any moment.
Let the market decide!
I've got to tell you that I'm a bit disappointed with our progress so far. I expected a lot of people willing to earn some money, but I've got only 4 relevant developers, 3 of them passed a very simple test, only one is actually doing anything.
This was not expected by me, when I had promised to work publicly and with BCH developers.
Another problem is that I have a certain vision that I described in the project description. In addition to that vision there is also a lot of experience talking to read.cash users. A lot of them are in countries with very bad Internet (2G, few kilobytes per second), using very old Android phones (10+ years, the size of an iPhone 4 and the speed half of that of iPhone 4).. And I also really hope that someday we will have 100MB blocks, 1GB, 1TB blocks. But now I'm tied in arguments with BCH developers who argue that many current solutions are good enough already and we don't need to change them - just build on top of a few convoluted and complex protocols, just download a block when needed (again, Africa, 2G, 100MB blocks), just download 640,000 block headers, listen to the whole mempool (with 1TB block we'll have 1TB mempool) - it's fine, blocks are tiny... Just send a few queries (now)... Just download a mempool fully.
(To those of you that know what this is about, please don't name names, I'm not here to play the blame game, everybody is entitled to their own opinions. It's fine.)
If your wallet becomes too big - create a new one. It's fine.
Sidenote: my read.cash wallet that gets the fees takes a few hours to open now, and it's barely 9 months old! I find current solutions unacceptable, I want my wallet to open up immediately and handle 100MB blocks as well as 60KB blocks.
I don't want to develop for tiny blocks or tiny wallets that need to be changed every few months.. I want huge blocks! I don't want mainnet to be as brittle as to break at the first sight of success.
A few of these discussions got me really tired and I have no leverage on these guys. They have money now, they have their vision, I have mine, described on the site, they don't want to do it my way. I didn't collect the funds to do it their way.
Yet I have made a commitment to work with them.
This is very tiresome. I feel like I've got myself into a trap - I have to work with these people, they don't want to work on my stuff.
This is just stupid.
One more thing is that now that I have Slack - I'm caught in endless private discussions of people trying to sell me their vision of how stuff should be done or questions about me or read.cash... I didn't sign up for that, I barely have any time to do the work, I don't have time for this, sorry.
Change #1: Private development
Having said that, I'm moving the project to private development.
Frankly, all I care about is to get this project done. I added an additional burden on myself to be do the public development. And it's tiresome.
The plan would be to hire some outside developers, using regular contracts, so that they don't have THEIR ideas on how to do the project and they'll just do what I described.
I think everybody cares about the end result - library working, document being written, etc...
Change #2: Private spending
Hired developers also means salaries. When people (in the real world) know salaries of other people, it leads to conflicts. I went through this experiment (public salaries) once in my life, I won't go through that again. Even people knowing your budget become a problem, since they start to bargain with you. (Again, we're talking about outside developers, they are not interested in BCH success, they are interested in getting as much money as possible)
By private spending I mean that I'll post periodically how much is done and how much funds is approximately left, but no details on who got what for what. Right now there's 99.83% funds left.
Some of you might see it as a money grab or something else - I can't blame you, but I'd rather see this project cancelled by market forces than drown in endless fights about why we should do exactly nothing or their idea, hope for small blocks and use what we have no matter how convoluted or hard it is, or why somebody's hourly rate should be bigger than that guy's.
Will this lead to everyone cancelling their donations? It sure could! It's voluntary funding after all, I can't force anyone to love what I do or how I do it.
If you donated and want a refund to your original address - just ping me.
When this post is 48 hours old, if more than 50% pledges remain, the project will move on as described above. If 50%+ cancels - everybody gets refunds to their original addresses.
submitted by readcash to btc [link] [comments]

I built a decentralized legal-binding smart contract system. I need peer reviewers and whitepaper proof readers. Help greatly appreciated!

I posted this on /cryptotechnology . It attracted quite a bit of upvotes but not many potential contributors. Someone mentioned I should try this sub. I read the rules and it seems to fit within them. Hope this kind of post is alright here...
EDIT: My mother language is french (I'm from Montreal/Canada). Please excuse any blatant grammatical errors.
TLDR: I built a decentralized legal-binding smart contract system. I need peer reviewers and whitepaper proof readers. If you're interested, send me an email to discuss: [email protected] . Thanks in advance!
Hi guys,
For the last few years, I've been working on a decentralized legal-binding contract system. Basically, I created a PoW blockchain software that can receive a hash as an address, and another hash as a bucket, in each transaction.
The address hash is used to tell a specific entity (application/contract/company/person, etc) that uses the blockchain that this transaction might be addressed to them. The bucket hash simply tells the nodes which hashtree of files they need to download in order to execute that contract.
The buckets are shared within the network of nodes. Someone could, for example, write a contract with a series of nodes in order to host their data for them. Buckets can hold any kind of data, and can be of any size... including encrypted data.
The blockchain's blocks are chained together using a mining system similar to bitcoin (hashcash algorithm). Each block contains transactions. The requested difficulty increases when the amount of transactions in a block increases, linearly. Then, when a block is mined properly, another smaller mining effort is requested to link the block to the network's head block.
To replace a block, you need to create another block with more transactions than the amount that were transacted in and after the mined block.
I expect current payment processors to begin accepting transactions and mine them for their customers and make money with fees, in parallel. Using such a mechanism, miners will need to have a lot of bandwidth available in order to keep downloading the blocks of other miners, just like the current payment processors.
The contracts is code written in our custom programming language. Their code is pushed using a transaction, and hosted in buckets. Like you can see, the contract's data are off-chain, only its bucket hash is on-chain. The contract can be used to listen to events that occurs on the blockchain, in any buckets hosted by nodes or on any website that can be crawled and parsed in the contract.
There is also an identity system and a vouching system...which enable the creation of soft-money (promise of future payment in hard money (our cryptocurrency) if a series of events arrive).
The contracts can also be compiled to a legal-binding framework and be potentially be used in court. The contracts currently compile to english and french only.
I also built a browser that contains a 3D viewport, using OpenGL. The browser contains a domain name system (DNS) in form of contracts. Anyone can buy a new domain by creating a transaction with a bucket that contains code to reserve a specific name. When a user request a domain name, it discovers the bucket that is attached to the domain, download that bucket and executes its scripts... which renders in the 3D viewport.
When people interact with an application, the application can create contracts on behalf of the user and send them to the blockchain via a transaction. This enables normal users (non-developers) to interact with others using legal contracts, by using a GUI software.
The hard money (cryptocurrency) is all pre-mined and will be sold to entities (people/company) that want to use the network. The hard money can be re-sold using the contract proposition system, for payment in cash or a bank transfer. The fiat funds will go to my company in order to create services that use this specific network of contracts. The goal is to use the funds to make the network grow and increase its demand in hard money. For now, we plan to create:
A logistic and transportation company
A delivery company
A company that buy and sell real estate options
A company that manage real estate
A software development company
A world-wide fiat money transfer company
A payment processor company
We chose these niche because our team has a lot of experience in these areas: we currently run companies in these fields. These niche also generate a lot of revenue and expenses, making the value of exchanges high. We expect this to drive volume in contracts, soft-money and hard-money exchanges.
We also plan to use the funds to create a venture capital fund that invests in startups that wants to create contracts on our network to execute a specific service in a specific niche.
I'm about to release the software open source very soon and begin executing our commercial activities on the network. Before launching, I'd like to open a discussion with the community regarding the details of how this software works and how it is explained in the whitepaper.
If you'd like to read the whitepaper and open a discussion with me regarding how things work, please send me an email at [email protected] .
If you have any comment, please comment below and Ill try to answer every question. Please note that before peer-reviewing the software and the whitepaper, I'd like to keep the specific details of the software private, but can discuss the general details. A release date will be given once my work has been peer reviewed.
Thanks all in advance!
P.S: This project is not a competition to bitcoin. My goal with this project is to enable companies to write contracts together, easily follow events that are executed in their contracts, understand what to expect from their partnership and what they need to give in order to receive their share of deals... and sell their contracts that they no longer need to other community members.
Bitcoin already has a network of people that uses it. It has its own value. In fact, I plan to create contracts on our network to exchange value from our network for bitcoin and vice-versa. Same for any commodity and currency that currently exits in this world.
submitted by steve-rodrigue to compsci [link] [comments]

Does any trusted source host the blockchain?

What I mean specifically is like the chainstate and blocks files, as it still takes days even with a small blockchain size compared to bitcoin.
My full node is now completely running and im thinking about just hosting the blockchain on the website I was going to build anyways. And Ive seen people discussing this back in like 2014-2016 but all of those "trusted" hosts are shutdown by now.
Why would I host the blockchain for download? Because Id like to see more full nodes out there and I feel as some people would love to host a node but they arent going to deal with having to wait days to just set it up. If you could just leave me your opinion that would be great, if you think this is stupid id really like to know why :)
submitted by ryanspencer0 to litecoin [link] [comments]

Cash App Customer Service 𝟑𝟏𝟎⥂𝟗𝟐𝟗⥂𝟏𝟏𝟗𝟏📞 cash app customer support number phone number for cash app ✴USA CANADA $#[email protected]#&#@",>>✴ HKTPFBM

Cash App Customer Service 𝟑𝟏𝟎⥂𝟗𝟐𝟗⥂𝟏𝟏𝟗𝟏📞 cash app customer support number phone number for cash app ✴USA CANADA $#[email protected]#&#@",>>✴ HKTPFBM
Cash App Customer Service 𝟑𝟏𝟎⥂𝟗𝟐𝟗⥂𝟏𝟏𝟗𝟏📞 cash app customer support number phone number for cash app ✴USA CANADA $#[email protected]#&#@",>>✴ HKTPFBM
Cash App Customer Service 𝟑𝟏𝟎⥂𝟗𝟐𝟗⥂𝟏𝟏𝟗𝟏📞 cash app customer support number phone number for cash app ✴USA CANADA $#[email protected]#&#@",>>✴ HKTPFBM
Cash App Customer Service 𝟑𝟏𝟎⥂𝟗𝟐𝟗⥂𝟏𝟏𝟗𝟏📞 cash app customer support number phone number for cash app ✴USA CANADA $#[email protected]#&#@",>>✴ HKTPFBM
Cash App Customer Service 𝟑𝟏𝟎⥂𝟗𝟐𝟗⥂𝟏𝟏𝟗𝟏📞 cash app customer support number phone number for cash app ✴USA CANADA $#[email protected]#&#@",>>✴ HKTPFBM
Cash App Customer Service 𝟑𝟏𝟎⥂𝟗𝟐𝟗⥂𝟏𝟏𝟗𝟏📞 cash app customer support number phone number for cash app ✴USA CANADA $#[email protected]#&#@",>>✴ HKTPFBM
Cash App is the easiest way to send, spend, save, and invest your money. It’s the SAFE, FAST, and FREE mobile banking app. SAFE: Protect all of your payments and investments with a passcode, TouchID, or FaceID. Pause spending on your Cash Card with one tap if you misplace it. All of your information is stored securely. FAST: Sign up and make your first payment in minutes. Instantly send and receive money from friends. Transfer money from Cash App to another bank account instantly instead of waiting days. Use your Cash App account and routing number to receive deposits up to two days earlier than is standard with most banks. FREE: Send and receive money at no cost. Get a completely free virtual Visa debit card in minutes, and we’ll mail you your custom physical debit card for free in about a week. Invest in your favorite stocks commission-free with as little as $1. * HERE’S HOW IT WORKS * Download and sign up for Cash App in a matter of minutes. The signup process is simple and fast so that you can start using Cash App right away. * SEND AND RECEIVE MONEY INSTANTLY * Receive, request, and send money from friends and family instantly with only a few taps. Cash App is the easiest way to pay a friend back for dinner or split rent with your roommates. * GET A FREE CUSTOM VISA DEBIT CARD * Order your Cash Card (a customizable Visa debit card) directly from Cash App. You’ll be able to instantly make online purchases using your virtual card or in-store purchases by adding your Cash Card to Apple Pay. We’ll also mail you your physical laser-etched Cash Card in less than a week so you can swipe, dip, or tap at any merchant. * RECEIVE YOUR PAYCHECK UP TO TWO DAYS EARLY * Deposit paychecks, tax returns, unemployment benefits, government stimulus payouts and more directly into your Cash App balance using your account and routing number. Receive deposits up to two days earlier than is standard with most other banks. Use the same account and routing information to pay bills using your Cash App balance. * GET INSTANT DISCOUNTS WITH CASH BOOST * Cash Card is the only free debit card with instant discounts at your favorite stores, websites, apps, and restaurants. These instant discounts - Cash Boosts - are easy to use and are applied to Cash Card transactions instantly. Just select a given Cash Boost in your app and then use your Cash Card to pay. It’s that simple. No points, no waiting, just instant savings. * BUY, SELL, DEPOSIT, AND WITHDRAW BITCOIN * Cash App is the easiest way to buy, sell, deposit, and withdraw Bitcoin. Track the BTC price in realtime in your app and get started by buying as little as $1 of Bitcoin. Your BTC arrives in your app instantly. You can then decide to keep it safe in Cash App or withdraw it to a different wallet. * BUY & SELL STOCKS COMMISSION-FREE * Instantly begin investing commission-free with Cash App. You can buy as little as $1 of stock in top US companies. Track stock prices in realtime in your app and monitor the performance of your overall investment portfolio. Create a list of companies to follow so you can stay up to date on performance. Brokerage services provided by Cash App Investing LLC, member FINRA / SIPC. Investing involves risk; you may lose money. Investments are not FDIC insured. Square Cash's Best Toll-Free/800 Customer Phone Number You came here to see Square Cash's phone number, the real-time current wait on hold and a way to skip right through the phone lines to get right to a Square Cash agent. There's good news and bad on that: the bad news is that they don't have a phone number, but the good is that we do know how to contact Square Cash anyways and help you with your issue. Over the last 18 months, 34,614 customers like you have come in search of a phone number for Square Cash and helped us confirm they don't have one. Common reasons that people try to call Square Cash customer support department include Account Access, Payment Problem, Dispute a Charge, Track an Order, Trouble Receiving a Payment and other customer service issues. Rather than trying to call Square Cash we recommend you tell us what issue you are having and then possibly contact them via web. Unfortunately, right now Square Cash doesn't have any phone numbers. It's not always clear what is the best way to talk to Square Cash representatives, so we started compiling this information built from suggestions from the customer community. Please keep sharing your experiences so we can continue to improve this free resource. Contacting Square Cash - by phone or otherwise While Square Cash does not have a toll-free number, it is also the only way to get in touch with them. The next best way to talk to their customer support team, according to other Square Cash customers, is by telling GetHuman about your issue above and letting us find somebody to help you. Besides calling, the next favorite option for customers looking for help is via Online Help for Customer Service. If you think this information is inaccurate or know of other ways to contact Square Cash please let us know so we can share with other customers. And you can click here if you want to compare all the contact information we've gathered for Square Cash. How GetHuman Helps If Square Cash Had a Phone Number GetHuman provides tools and information to over 50 million customers per year in effort to make customer service easier and faster. We don't know a phone number for Square Cash, but for large companies that do have them, we provide real-time current wait on hold, tools for skipping the hold music altogether, reminders for when the call center opens, and much more. For example, see our AT&T Wireless Phone Number page. Or our DirecTV Phone Number page. We are able to provide secrets and the best tools by getting feedback from you and rest of our customer community, and by sourcing some of those secrets and tips from Square Cash customers like yourself. What is GetHuman's Relationship to Square Cash? In short, the two companies are not related. GetHuman builds free tools and shares information amongst customers of companies like Square Cash. For large companies that includes tools such as our GetHuman Phone, which allows you to call a company but skip the part where you wait on the line listening to their call technology music. We've created these shortcuts and apps to try to help customers like you (and ourselves!) navigate the messy phone menus, hold times, and confusion with customer service, especially with larger companies. And as long as you keep sharing it with your friends and loved ones, we'll keep doing it. Cash App Support Number +1 619 393 2951 Cash App Customer Service Number dfsdfdsfd Cash App is astounding assistance programming that is widely utilized by a huge number of clients. the most effective method to secret key not working. Cash App uphold telephone number will fix issues of Antiviruss specialized focus will assist you with client support care for moment ink It blesses effortlessly of access and flexibility to its clients. Cash App webmail guarantees top of the line security by utilizing secure encryption strategy for correspondence and information sharing by means of messages. Street Runner proffers plentiful scope of web mail administrations, prompt responsiveness and direct arrangements, strong group of experts, 24 X 7 constant backings, solid management and specialized or non specialized help over a call by means of helpline numbers. Cash App CUSTOMER SERVICE NUMBER Cash App is remarkable webmail administration programming that is generally utilized by a great many clients. It blesses without any difficulty and adaptability to its clients and thus Road Runner has picked up notoriety among its rivals whether expert or private. Cash App webmail gives high email security by utilizing secure encryption for messages. Security, Confidentiality and Ease of access are the engaged zones that make Road Runner not quite the same as different contenders. An uncommon alternative of "Permit and Block" is given by the webmail on the off chance that you are getting irritated by email from a particular mail id. Cash App Customer Care Number New clients may confront challenges in managing not many of its development includes yet once they get the necessary comprehension of executing it essentially to their everyday schedule they will acknowledge how keen work helps in this serious world. KEY FEATURES OF ROAD RUNNER EMAIL: Huge location book: Huge location space is given to store every one of your contacts at one advantageous and secure spot that can be gotten to whenever, anyplace. Primary Email with 5 Sub email accounts: An essential email account with 5 sub email accounts are permitted with discrete capacity limit exclusively. Secure messaging: Cash App gives very good quality security to the protected stockpiling of your information alongside the start to finish scrambled security for the sends sent and got. Parental controls: This alternative gives you a simplicity of psyche since utilizing this component you don't need to stress over the children interfering with your stuff No-limit stockpiling: Cash App offers huge extra room for each email account. You will have sufficient of extra room that you don't need to stress over the size of your records. Comprehensive spam insurance: Automatic spam security is given to every one of its clients. BEING A HIGHLY SECURED EMAIL Cash App SECURITY FEATURES INCLUDE: Complete sweep for infections. Highly created security choices Complete spam control Automatic dispose of for tainted messages Automatic erase for garbage/spam messages Despite of these you can really send the hefty documents in a single mail by taking up the alternative of a paid part. Being a perpetual and paid part at financially savvy and pocket inviting costs lets you remembered from the problem of packing the documents for the sends and trading off with the quality.
submitted by curtiyolma to u/curtiyolma [link] [comments]

Don't blindly follow a narrative, its bad for you and its bad for crypto in general

I mostly lurk around here but I see a pattern repeating over and over again here and in multiple communities so I have to post. I'm just posting this here because I appreciate the fact that this sub is a place of free speech and maybe something productive can come out from this post, while bitcoin is just fucking censorship, memes and moon/lambo posts. If you don't agree, write in the comments why, instead of downvoting. You don't have to upvote either, but when you downvote you are killing the opportunity to have discussion. If you downvote or comment that I'm wrong without providing any counterpoints you are no better than the BTC maxis you despise.
In various communities I see a narrative being used to bring people in and making them follow something without thinking for themselves. In crypto I see this mostly in BTC vs BCH tribalistic arguments:
- BTC community: "Everything that is not BTC is shitcoin." or more recently as stated by adam on twitter, "Everything that is not BTC is a ponzi scheme, even ETH.", "what is ETH supply?", and even that they are doing this for "altruistic" reasons, to "protect" the newcomers. Very convenient for them that they are protecting the newcomers by having them buy their bags
- BCH community: "BTC maxis are dumb", "just increase block size and you will have truly p2p electronic cash", "It is just that simple, there are no trade offs", "if you don't agree with me you are a BTC maxi", "BCH is satoshi's vision for p2p electronic cash"
It is not exclusive to crypto but also politics, and you see this over and over again on twitter and on reddit.
My point is, that narratives are created so people don't have to think, they just choose a narrative that is easy to follow and makes sense for them, and stick with it. And people keep repeating these narratives to bring other people in, maybe by ignorance, because they truly believe it without questioning, or maybe by self interest, because they want to shill you their bags.
Because this is BCH community, and because bitcoin is censored, so I can't post there about the problems in the BTC narrative (some of which are IMO correctly identified by BCH community), I will stick with the narrative I see in the BCH community.
The culprit of this post was firstly this post by user u/scotty321 "The BTC Paradox: “A 1 MB blocksize enables poor people to run their own node!” “Okay, then what?” “Poor people won’t be able to use the network!”". You will see many posts of this kind being made by u/Egon_1 also. Then you have also this comment in that thread by u/fuck_____________1 saying that people that want to run their own nodes are retarded and that there is no reason to want to do that. "Just trust block explorer websites". And the post and comment were highly upvoted. Really? You really think that there is no problem in having just a few nodes on the network? And that the only thing that secures the network are miners?
As stated by user u/co1nsurf3r in that thread:
While I don't think that everybody needs to run a node, a full node does publish blocks it considers valid to other nodes. This does not amount to much if you only consider a single node in the network, but many "honest" full nodes in the network will reduce the probability of a valid block being withheld from the network by a collusion of "hostile" node operators.
But surely this will not get attention here, and will be downvoted by those people that promote the narrative that there is no trade off in increasing the blocksize and the people that don't see it are retarded or are btc maxis.
The only narrative I stick to and have been for many years now is that cryptocurrency takes power from the government and gives power to the individual, so you are not restricted to your economy as you can participate in the global economy. There is also the narrative of banking the bankless, which I hope will come true, but it is not a use case we are seeing right now.
Some people would argue that removing power from gov's is a bad thing, but you can't deny the fact that gov's can't control crypto (at least we would want them not to).
But, if you really want the individuals to remain in control of their money and transact with anyone in the world, the network needs to be very resistant to any kind of attacks. How can you have p2p electronic cash if your network just has a handful couple of nodes and the chinese gov can locate them and just block communication to them? I'm not saying that this is BCH case, I'm just refuting the fact that there is no value in running your own node. If you are relying on block explorers, the gov can just block the communication to the block explorer websites. Then what? Who will you trust to get chain information? The nodes needs to be decentralized so if you take one node down, many more can appear so it is hard to censor and you don't have few points of failure.
Right now BTC is focusing on that use case of being difficult to censor. But with that comes the problem that is very expensive to transact on the network, which breaks the purpose of anyone being able to participate. Obviously I do think that is also a major problem, and lightning network is awful right now and probably still years away of being usable, if it ever will. The best solution is up for debate, but thinking that you just have to increase the blocksize and there is no trade off is just naive or misleading. BCH is doing a good thing in trying to come with a solution that is inclusive and promotes cheap and fast transactions, but also don't forget centralization is a major concern and nothing to just shrug off.
Saying that "a 1 MB blocksize enables poor people to run their own" and that because of that "Poor people won’t be able to use the network" is a misrepresentation designed to promote a narrative. Because 1MB is not to allow "poor" people to run their node, it is to facilitate as many people to run a node to promote decentralization and avoid censorship.
Also an elephant in the room that you will not see being discussed in either BTC or BCH communities is that mining pools are heavily centralized. And I'm not talking about miners being mostly in china, but also that big pools control a lot of hashing power both in BTC and BCH, and that is terrible for the purpose of crypto.
Other projects are trying to solve that. Will they be successful? I don't know, I hope so, because I don't buy into any narrative. There are many challenges and I want to see crypto succeed as a whole. As always guys, DYOR and always question if you are not blindly following a narrative. I'm sure I will be called BTC maxi but maybe some people will find value in this. Don't trust guys that are always posting silly "gocha's" against the other "tribe".
EDIT: User u/ShadowOfHarbringer has pointed me to some threads that this has been discussed in the past and I will just put my take on them here for visibility, as I will be using this thread as a reference in future discussions I engage:
When there was only 2 nodes in the network, adding a third node increased redundancy and resiliency of the network as a whole in a significant way. When there is thousands of nodes in the network, adding yet another node only marginally increase the redundancy and resiliency of the network. So the question then becomes a matter of personal judgement of how much that added redundancy and resiliency is worth. For the absolutist, it is absolutely worth it and everyone on this planet should do their part.
What is the magical number of nodes that makes it counterproductive to add new nodes? Did he do any math? Does BCH achieve this holy grail safe number of nodes? Guess what, nobody knows at what number of nodes is starts to be marginally irrelevant to add new nodes. Even BTC today could still not have enough nodes to be safe. If you can't know for sure that you are safe, it is better to try to be safer than sorry. Thousands of nodes is still not enough, as I said, it is much cheaper to run a full node as it is to mine. If it costs millions in hash power to do a 51% attack on the block generation it means nothing if it costs less than $10k to run more nodes than there are in total in the network and cause havoc and slowing people from using the network. Or using bot farms to DDoS the 1000s of nodes in the network. Not all attacks are monetarily motivated. When you have governments with billions of dollars at their disposal and something that could threat their power they could do anything they could to stop people from using it, and the cheapest it is to do so the better
You should run a full node if you're a big business with e.g. >$100k/month in volume, or if you run a service that requires high fraud resistance and validation certainty for payments sent your way (e.g. an exchange). For most other users of Bitcoin, there's no good reason to run a full node unless you reel like it.
Shouldn't individuals benefit from fraud resistance too? Why just businesses?
Personally, I think it's a good idea to make sure that people can easily run a full node because they feel like it, and that it's desirable to keep full node resource requirements reasonable for an enthusiast/hobbyist whenever possible. This might seem to be at odds with the concept of making a worldwide digital cash system in which all transactions are validated by everybody, but after having done the math and some of the code myself, I believe that we should be able to have our cake and eat it too.
This is recurrent argument, but also no math provided, "just trust me I did the math"
The biggest reason individuals may want to run their own node is to increase their privacy. SPV wallets rely on others (nodes or ElectronX servers) who may learn their addresses.
It is a reason and valid one but not the biggest reason
If you do it for fun and experimental it good. If you do it for extra privacy it's ok. If you do it to help the network don't. You are just slowing down miners and exchanges.
Yes it will slow down the network, but that shows how people just don't get the the trade off they are doing
I will just copy/paste what Satoshi Nakamoto said in his own words. "The current system where every user is a network node is not the intended configuration for large scale. That would be like every Usenet user runs their own NNTP server."
Another "it is all or nothing argument" and quoting satoshi to try and prove their point. Just because every user doesn't need to be also a full node doesn't mean that there aren't serious risks for having few nodes
For this to have any importance in practice, all of the miners, all of the exchanges, all of the explorers and all of the economic nodes should go rogue all at once. Collude to change consensus. If you have a node you can detect this. It doesn't do much, because such a scenario is impossible in practice.
Not true because as I said, you can DDoS the current nodes or run more malicious nodes than that there currently are, because is cheap to do so
Non-mining nodes don't contribute to adding data to the blockchain ledger, but they do play a part in propagating transactions that aren't yet in blocks (the mempool). Bitcoin client implementations can have different validations for transactions they see outside of blocks and transactions they see inside of blocks; this allows for "soft forks" to add new types of transactions without completely breaking older clients (while a transaction is in the mempool, a node receiving a transaction that's a new/unknown type could drop it as not a valid transaction (not propagate it to its peers), but if that same transaction ends up in a block and that node receives the block, they accept the block (and the transaction in it) as valid (and therefore don't get left behind on the blockchain and become a fork). The participation in the mempool is a sort of "herd immunity" protection for the network, and it was a key talking point for the "User Activated Soft Fork" (UASF) around the time the Segregated Witness feature was trying to be added in. If a certain percentage of nodes updated their software to not propagate certain types of transactions (or not communicate with certain types of nodes), then they can control what gets into a block (someone wanting to get that sort of transaction into a block would need to communicate directly to a mining node, or communicate only through nodes that weren't blocking that sort of transaction) if a certain threshold of nodes adheres to those same validation rules. It's less specific than the influence on the blockchain data that mining nodes have, but it's definitely not nothing.
The first reasonable comment in that thread but is deep down there with only 1 upvote
The addition of non-mining nodes does not add to the efficiency of the network, but actually takes away from it because of the latency issue.
That is true and is actually a trade off you are making, sacrificing security to have scalability
The addition of non-mining nodes has little to no effect on security, since you only need to destroy mining ones to take down the network
It is true that if you destroy mining nodes you take down the network from producing new blocks (temporarily), even if you have a lot of non mining nodes. But, it still better than if you take down the mining nodes who are also the only full nodes. If the miners are not the only full nodes, at least you still have full nodes with the blockchain data so new miners can download it and join. If all the miners are also the full nodes and you take them down, where will you get all the past blockchain data to start mining again? Just pray that the miners that were taken down come back online at some point in the future?
The real limiting factor is ISP's: Imagine a situation where one service provider defrauds 4000 different nodes. Did the excessive amount of nodes help at all, when they have all been defrauded by the same service provider? If there are only 30 ISP's in the world, how many nodes do we REALLY need?
You cant defraud if the connection is encrypted. Use TOR for example, it is hard for ISP's to know what you are doing.
Satoshi specifically said in the white paper that after a certain point, number of nodes needed plateaus, meaning after a certain point, adding more nodes is actually counterintuitive, which we also demonstrated. (the latency issue). So, we have adequately demonstrated why running non-mining nodes does not add additional value or security to the network.
Again, what is the number of nodes that makes it counterproductive? Did he do any math?
There's also the matter of economically significant nodes and the role they play in consensus. Sure, nobody cares about your average joe's "full node" where he is "keeping his own ledger to keep the miners honest", as it has no significance to the economy and the miners couldn't give a damn about it. However, if say some major exchanges got together to protest a miner activated fork, they would have some protest power against that fork because many people use their service. Of course, there still needs to be miners running on said "protest fork" to keep the chain running, but miners do follow the money and if they got caught mining a fork that none of the major exchanges were trading, they could be coaxed over to said "protest fork".
In consensus, what matters about nodes is only the number, economical power of the node doesn't mean nothing, the protocol doesn't see the net worth of the individual or organization running that node.
Running a full node that is not mining and not involved is spending or receiving payments is of very little use. It helps to make sure network traffic is broadcast, and is another copy of the blockchain, but that is all (and is probably not needed in a healthy coin with many other nodes)
He gets it right (broadcasting transaction and keeping a copy of the blockchain) but he dismisses the importance of it
submitted by r0bo7 to btc [link] [comments]

Bitcoin Q&A: Scaling and the block size debate - YouTube Bitcoin Block Size, Private Keys, Bitcoin Cash, Exodus Wallet Disabled BTC Trading When Will Bitcoin Raise the Block Size Limit? #Bitcoin #MCC2019 Luke Dashjr Future Value of Bitcoin: The Block Size Debate

Bitcoin Core initial synchronization will take time and download a lot of data. You should make sure that you have enough bandwidth and storage for the full block chain size (over 350GB). If you have a good Internet connection, you can help strengthen the network by keeping your PC running with Bitcoin Core and port 8333 open. Download a block is easy! Here is a link to an online explorer with a specific block, for your experimental purposes I suggest storing the block in its raw hex format (or binary).; Blocks don't have a predefined file format. The Bitcoin protocol enforces a format to the blocks, but how they are stored locally doesn't matter. Download Bitcoin Core Neueste Version: 0.20.1 Download Bitcoin Core Bitcoin Core 0.20.1. Überprüfen Sie Ihre Bandbreite und den freien Speicherplatz. Die Erstsynchronisierung von Bitcoin Core dauert sehr lange und lädt eine große Menge Daten herunter. Sie sollten sicherstellen, dass Sie ausreichend Bandbreite und Speicherplatz für die volle Größe der Blockchain (über 350GB) zur ... Average Block Size (MB) Average Transactions Per Block. Total Number of Transactions. Median Confirmation Time. Average Confirmation Time. Mining Information. Network Activity . Wallet Activity. Market Signals. Sponsored Content. Blockchain Size (MB) The total size of the blockchain minus database indexes in megabytes. 30 Days 60 Days 180 Days 1 Year 3 Years All Time. Raw Values 7 Day Average ... The Bitcoin block size limit is a parameter in the Bitcoin protocol that limits the size of Bitcoin blocks, and, therefore, the number of transactions that can be confirmed on the network approximately every 10 minutes. Although Bitcoin launched without this parameter, Satoshi Nakamoto added a 1 megabyte block size limit back when he was still the lead developer of the project. This translated ...

[index] [44754] [36010] [38781] [42544] [35519] [34747] [69] [37237] [12946] [2790]

Bitcoin Q&A: Scaling and the block size debate - YouTube

Luke Dashjr summarises the reasons big blocks are harmful to Bitcoin. This video goes over the Bitcoin block size issue and the current Exodus Issue and how to export your private keys into the Bitcoin Core wallet. Make Bitcoins And Get Paid Each Day Save 3% on ... Bitcoin Just Dropped! 🔴4 Months Of Red. 🔴A Lot Of Uncertainty. HERE IS THE BULLISH CASE FOR BITCOIN! HERE IS THE BULLISH CASE FOR BITCOIN! - Duration: 12:43. Whether the block size should be increased to 20MB has created more controversy than any other question in Bitcoin's recent history. For some, it is an urgent and necessary step in Bitcoin's ... In this talk in Berlin, Andreas looks at the inner structure of bitcoin and how high-level financial and trust applications are composed from smaller element...

#